JYD-1036SG is the 1800w automatic ultrasonic cleaner for the industrial parts. It is digital control type.
◆ Internal SUS304 or SUS316L tank, chrome coated on the thickness at least 2.0 mm vibration side. Inside argon welded by manual, outside by riveter to ensure the strong and durable of the tank.
◆ Automatic frequency tracking generator, MCU-sweep drive, strong ultrasonic power, uniform cleaning performance.
◆ Industrial high-Q transducer, high-strength glue and stud bonding, high conversion efficiency and strong output.
◆ Digital control interface with memory function, one-button to start degassing. Digital control of temperature, 0-100 Celsius degree adjustable. Digital timing control, 0-9 hours 59 minutes adjustable. Digital ultrasonic power adjustment 0-100%, to meet the cleaning requirements of different products.
◆ The whole machine is equipped with ultrasonic generators, a stainless steel washing basket, a drain valve, a sound-proof cover, a power cord, four steels with lock, etc.
◆ 2500V high voltage test, strict production process and aging process, products passed CE, FCC, RoHs certification, one year guarantee, free technical support all lifetime. Failure alarm function and water level protection to ensure the safety.
◆ Additional circulation filtration and overflow system, automatic basket lifting system, muti-tank optional.
Q: Why ultrasonic power and frequency important for choosing an cleaning equipment ?
Ultrasonic cleaning sometimes uses low power and takes a long time without removing dirt. If the power reaches a certain value, the dirt is quickly removed. If the power is too large, the cavitation intensity will be greatly increased, and the cleaning effect will be improved. However, the more precise parts also have an etch point, and the vibration plate at the bottom of the cleaning machine is cavitation and the water point corrosion is also increased. When using an organic solvent such as trichloroethylene, there is basically no problem, but when using water or a water-soluble cleaning solution, it is susceptible to water pitting corrosion. If the surface of the vibrating plate has been scratched, cavitation corrosion is more serious under high power. The ultrasonic power should be selected according to the actual use.
Ultrasonic cleaning frequency is from 28 kHz to 120 kHz. The physical cleaning force caused by cavitation when using water or water cleaning agent is obviously beneficial to low frequency, generally about 28-40 kHz. For parts with small gaps, slits and deep holes, it is better to use high frequency (generally 40 kHz or more), even several hundred kHz. When cleaning the watch parts, use 100 kHz. If you use broadband FM cleaning, the effect is better.